Meltdown

| Print |


High Performance De-Icing and Anti-Icing Solution

MeltDown™ is specifically designed for anti-icing, direct application de-icing, frost prevention, and prewetting of solids (salt and sand).

When used for anti-icing operations, application rates of 40-70 litres per lane kilometer (20-30 gallons per lane mile) are typical (up to 90 litres per lane kilometer should be considered the maximum in any anti-icing situation). In direct application deicing, 90-100 litres per lane kilometer (40-60 gallon per lane mile) applications are used. For frost prevention, application rates of 20-40 litres per lane kilometer (15-20 gallons per lane mile) are employed. These rates can vary depending upon storm conditions and service level goals.

As a pre-wetting agent, MeltDown™ can be used at rates from 20-40 litres per tonne (5-15 gallons per ton) of substrate, depending upon the solid used and the performance objective.

MeltDown™ provides a variety of applications in one, non-toxic, cost-effective product:

  • ANTI-ICING – “From the Bottom Up”
  • DE-ICING – “From the Top Down”
  • PRE-WETTING - SALT

For more information on Meltdown, please contact us or view this PDF (Acrobat Reader Required)